T6753 Automotive CO2 Sensor

The Telaire Carbon Dioxide (Co2) Sensor for Vehicles is a Non-Dispersive Infrared (NDIR) carbon dioxide sensor that implements a single-channel diffuse sampling method for automotive HVAC applications, including automatic fresh air control and safety detection alarms for carbon dioxide refrigerants. Together with the patented ABC LogicTM lifetime calibration guarantee, its low power consumption, compact design and simple product integration make it an affordable gas sensing solution.

Characteristic：

  • Operating Temperature Range: -40℃~90
  • Rated voltage: 9VDC-16VDC
  • Current consumption:
    Activation average: 20mA
    Low power consumption average: 15mA
    Sleep mode: 25uA
    Peak maximum: 120mA
  • Accuracy and measuring range：
    400   to   5000ppm:+/-200ppm
    5000ppm  to  4%:+/-10%of  the  reading
    4%to  6.5%:accuracy   not  specified
    (outside 0℃ to 50℃):+/-0.5%of  the   read
  • Measurement range:
    400-10,000ppm Co2Output
    Range:0-65,000ppm Co2
  • LogicTM – Lifetime Calibration Guarantee
  • T Line Voltage: 3.3VDC
  • PCB 2.54m spaced through-hole connection

Appliance：

  • Automotive HVAC – Interior Air Quality and Comfort Control
  • Co2 Refrigerant Leak Detection

Attached Image：

Ordering Model：

Part Number                         Standard

T6753                        PCBA only, without case

 

Similar Posts

Temperature Compensated Analog mV Pressure Sensors

All Sensors manufactures ultra-low, low, and medium pressure transducers that offer accuracy and highly repeatable performance, providing our customers with best-in-class, quality transducer solutions. These calibrated and compensated sensors provide accurate, stable output over a wide temperature range. The series is suitable for use with non-corrosive, non-ionic working fluids such as air and dry gases….

Duct Air Temperature Sensor

The Thermometrics Duct Temperature Sensor is a temperature sensor that can be used to determine the temperature of a wide range of gas flow fields. the NTC in the protective probe, along with the built-in thermal grease provides an optimal solution for heat transfer with fast time response. Suitable for a wide range of applications…

Helicopter Accelerometers

Designed for helicopter condition monitoring, the HA series is a high stability accelerometer utilizing high reliability piezoelectric ceramic elements and low noise processing circuitry to provide either a 20mV/g or 40 mV/g sensitivity acceleration output, or a vibration velocity output. Features include ±5% sensitivity tolerance, top outlet, 3-pin MIL-C-26482 type connector, rugged 316L stainless steel…

High Precision Temperature Sensors

Temperature standards type S/AS/ES consist of ultra-stable thermistor probes assembled in thin-walled stainless steel housings with shielded extension cables. The thermistors used are specially treated to ensure long-term stability. All thermistor temperature standards are ruggedly constructed and suitable for liquid immersion. Characteristic： Product Prefix: S, AS , ES Bath calibration accuracy: ±0.0015°C from 0°C to…

Evaporator Temperature Sensor

The evaporator temperature sensor is used to measure the evaporator core temperature. The evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and reliable thermistor to measure its temperature to prevent core freezing. Core freezing can cause expensive…