The Pressure Transmitter Module (PTM) takes into account the general trend towards miniaturization and cost-effectiveness. Due to their optimized dimensions, the PTM series sensors can be used easily and flexibly in applications with demanding installation spaces. In addition, the modular design with its wide range of electrical and mechanical interface possibilities can also be easily…
Our Oil Pressure Sensor OPS measures oil pressure in transmissions such as electric vehicles to optimize engine power. It is designed to measure the absolute pressure in the transmission housing and is robust enough to be used in oil. The electronic unit with digital output signal (SENT) transmits the measurement results accurately, safely and quickly….
The CCT High Pressure Pressure Temperature Sensor has been developed specifically for high pressures and temperatures in CO2 heat pumps (R744). This heat pump is mainly used for thermal management of electric vehicles (EV). Thanks to its robust stainless steel design, the CCT sensor is able to cope with the high pressures and temperatures in…
CCT pressure-temperature sensors are commonly used in climate control systems for heat pumps and thermal management (batteries), especially in vehicles with non-traditional drives. Specially developed thermistors enable a fast response in flowing media and guarantee a high accuracy of the temperature measurement. The advantages of this design are its compact dimensions and minimal weight, which…
The Pressure Sensor (CCT) has been specially developed to measure the pressure of refrigerants in motor vehicles. The hermetically sealed, robust aluminum housing makes the sensor a cost-effective solution for automotive air conditioning systems. Thanks to its high-quality stainless steel measuring element, the CCT is compatible with a wide range of fluids. Its innovative evaluation…
The combination sensor provides separate analog pressure and temperature output signals and is designed for vehicle transportation applications to reduce size and cost. The combination sensor is used for liquid and gas condition monitoring and is suitable for temperatures up to +1350C. Characteristic： Operating Temperature Range: -40℃~135℃A Zone Supply Voltage: 5±0.25VDC Supply current: <10mA Temperature…
To improve the performance of air filtration systems, the NovaSensor FMA Series Filtered Air Restriction (FAR) sensors utilize high-precision NPA silicone piezoresistive technology to accurately measure pressure loss in a variety of air filtration units in a small form factor that is easy to install and maintenance-free.The FAM series features configurable thresholds that allow it…
Our high-pressure sensors HPS are specially designed for hydrogen (H₂) applications such as filling stations and high-pressure tanks, as well as for measurement and testing technology. Our HPS sensors are designed for two nominal pressure ranges of 0 to 500 bar and 0 to 900 bar for measuring system and tank pressure in stationary or…
Wilcoxon’s range of high performance accelerometers have a high MTBF to ensure long term stability and lower sensitivity tolerances for more accurate measurements. The accelerometers have a wide frequency range and are suitable for routine monitoring of rotating machinery. These sensors are used to detect rotating equipment failures between 30 and 60,000 CPM and to…
The Low Frequency Series accelerometers feature high sensitivity, extended low range frequency response to detect both high and low speed vibration, and are non-suitable for critical low speed rotating equipment condition monitoring applications. Characteristic： Sensitivity: 500mV/g, ±5% tolerance Minimum 0.1Hz frequency response Stable temperature response (-50℃~120℃) Ultra-low electrical noise High performance ceramic, shear mode Reverse…
