Type 95 NTC thermistors are interchangeable thermistors protected with an epoxy resin coating and are available with a choice of three wire types, bare tinned copper, bare tinned alloy, or PTFE insulated wire. They are suitable for temperature measurement, control, and compensation in the -112 °F to 302 °F (-80 °C ~ 150 °C) range…
Type SC epoxy encapsulated interchangeable thermistors are high precision NTCs protected by a bushing with nickel conductors in a high density insulating jacket. They provide accurate temperature measurement, control, and compensation over the -40° C to 105° C (-40° F to 221 ° F) range, with sensitivity greater than -4%/°C at 25° C (77 °…
TG Series NTCs are glass sealed radial type thermistors featuring high temperature resistance and high accuracy in a water and oil resistant design. They are suitable for a wide range of applications such as automotive, heating/cooling equipment, boiler systems and electrical appliances. Characteristic： High temperature resistance up to +300 °C (572 °F) Chip components Fast…
The TC65531 series of thermocouples utilize Fine Wire technology for small size and high sensitivity, with a brazed thermocouple body for high sensitivity, as well as excellent long term stability and repeatability to provide real-time accurate temperature monitoring for interventional applications in medical and industrial settings. Characteristic： Small size: Head size 0.33mm (max) High accuracy:…
Coolant Temperature Sensors (CTS) monitor the temperature of the coolant in a variety of applications. In the event of excessive temperatures, the sensor sends a notification signal so that measures can be taken to prevent permanent damage or even unsafe conditions. In engine coolant applications, the CTS monitors the temperature of the coolant, which is…
The Thermoetrics GE-2142 HVAC Duct Temperature Sensors are OEM solutions for measuring air temperature in ventilation ducts. These sensors provide a signal output that is proportional to the duct air temperature. This signal is used as an input to the controller, which parses the signal and adjusts the output accordingly. Characteristic： Operating Temperature Range: -40°C~135°C…
The evaporator temperature sensor is used to measure the evaporator core temperature. The evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and reliable thermistor to measure its temperature to prevent core freezing. Core freezing can cause expensive…
Thermoetrics Automotive Refrigerant Temperature Sensors measure the refrigerant temperature on the high pressure side and low pressure side of an air conditioning system. The temperature sensors are used to detect the operating temperature of the air conditioning system to determine the operating condition and potential malfunction of the air conditioning system. Characteristic： Operating temperature range:…
A clamp temperature sensor monitors the temperature of the fluid flowing through the pipe. The system control module receives this temperature reading and uses the control loop to control the overall system temperature. Characteristic： Easy to install galvanized spring steel spring clamp High sensitivity temperature measurement Compact design Connector Position Assurance (CPA) Vw75174 Approved Connector…
The Thermometrics Coolant Temperature Sensor monitors the temperature of the coolant used to cool the EV/PHEV battery module. The purpose of the sensor is to communicate battery overheating conditions to the Battery Management System (BMS). The vehicle system uses this information to control battery charging and overheating to prevent damage to the battery. The GE-2133…
