Hazardous Area Sensors

A-1758 EGR temperature sensors are available in 150° C and 300° C temperature versions. They are used to monitor the temperature at several locations in the diesel engine as part of the engine control strategy. The high temperature sensor is used for the exhaust gas and the low temperature sensor is used for the intake…

NTC thermistor assemblies are designed with tight interchangeable tolerances, small size and fast response time for intermittent and continuous patient temperature monitoring. Characteristic： Product Prefix: MA100, A329, A341, A350, A362 CPO302233 Max OD Range: 0.030“ to 0.080” (0.76mm to 2.03mm) “400 Series”, R25=2252 Ohms R25:2252 and 10 K Ohms Interchangeability to ±0.05°C@+37°C Temperature range: -40°C…

The Coolant Temperature Sensor monitors the coolant temperature used to cool the EV/PHEV battery module. The sensor’s function is to communicate battery overheating conditions to the Battery Management System (BMS). The vehicle system uses this information to control battery charging and overheating to prevent damage to the battery. Characteristic： Operating temperature range: -40°C ~ 130°C…

Exhaust Gas Recirculation (EGR) temperature sensors are EGR systems for gasoline or diesel engines. In a closed EGR system, a portion of the exhaust gases are recirculated, cooled and mixed with the intake air into the engine cylinders. This technology is used to reduce the amount of NOx (Nitrogen Oxides) produced during the combustion process…

The ZTP-148SR infrared (IR) sensor consists of a thermal element, IR filter, and thermistor for temperature compensation, all packaged in a hermetically sealed TO-46(18) metal header. A variety of filters are available to maximize performance in specific applications. Thermopile infrared sensors are used for non-contact surface or infrared temperature measurement. Characteristic： Compact Design High sensitivity…

Transmission Fluid Temperature Sensors are used in automotive applications to monitor the temperature of the transmission fluid and provide feedback to prevent the transmission from overheating, which would otherwise cause performance and reliability issues. Characteristic： Working pressure range:0 Bar～20 Bar R@100℃:183Ω±2% Sealing specification: Leakage rate is <0.5% when exposed to 20Bar oil pressure for 1…